RSB Infra Solution

RSB Infra Solution” are a Wholesaler, Trader , Distributor and Retailer of  Waterproofing Chemical, Waterproofing Compound, etc.SikaGrout®-214 IN is a cement based 1-component, ready to mix, non-shrink, pourable and flowable, two stage expanding engineering grout in dry powder form. It is widely used for precision grouting in engineering applications subjected to static and dynamic loads. CHARACTERISTICS / ADVANTAGES ▪ Dual shrinkage compensated ▪ Suitable for temperature of above 0 °C up to +200 °C ▪ Easy to mix, only add water ▪ Adjustable consistency ▪ Very good flow characteristics ▪ Rapid strength development ▪ Excellent bond to concrete ▪ No segregation or bleeding ▪ High final strengths ▪ Initial expansion by gas generation ▪ Impact and vibration resistant Non-corrosive to anchor bolts, base plate / saddle / frame, sliding plate ▪ ▪ Not harmful to concrete and reinforcing steel ▪ Not flammable ▪ Non-toxic ▪ Frost, oil and fire resistant ▪ Require normal curing Suitable to use under restraints and grout thickness required ▪ ▪ Expansive to counteract initial shrinkage Maximum flow distance is compatible to the dimensions of base plate / saddle / frame ▪ Resistant to the chemicals, gases etc. being handled in equipment ▪ ▪ Chloride free

RSB Infra Solution” are a Wholesaler, Trader , Distributor and Retailer of  Waterproofing Chemical, Waterproofing Compound, etc. Roff Non-Skid Adhesive gives excellent bond on cementitious surfaces like, concrete, plaster, etc. It forms a waterproof barrier between two surfaces and has excellent ‘grab’ properties. This is an ideal product for Tile-on-Tile applications.
Features & Benefits

• Ready to use, needs only mixing with water
• Excellent adhesion, low shrinkage
• Suitable for indoor and tile on tile applications
• Sufficiently flexible to accommodate physical & thermal movements
•  Needs no curing, needs no hacking or mechanical key on the surfaces
• Floors can be used after 24 hours
•  Soaking of tiles & backing of surface not required

Precautions & Limitations 

•  Always add powder to water and not water to powder. 
•  Do not add more water than recommended. 
•  Do not add sand or cement at site.
•   Before doing tile-on-tile application, ensure that the original tiling surface is in sound condition. 
• In case of undulations in the existing floor, rectify the same before applying Roff Non-Skid Adhesive. 
• Strictly not recommended for the direct use on gypsum plaster, paint, wood & metal

RSB Infra Solution” are a Wholesaler, Trader , Distributor and Retailer of  Waterproofing Chemical, Waterproofing Compound, etc. Dr. Fixit Epoxy Bonding Agent is a two part solvent free bonding agent composed of liquid epoxy resin and hardener. It is used for bonding of structural concrete new to old concrete and bonding agent for bricks and steel components because it gives excellent bonding properties to freshly mixed concrete/mortars, glazed bricks, tiles, etc. Areas of Application

•  Bonding agent for bonding of old to new concrete / mortar. 
•  To extend or repair structural concrete. 
•  Bonding agent of glazed brick, tiles, steel & structural members.

 Features & Benefit

•  Ease of application - Easily applicable by brush as a bonding agent for old to new concrete / mortar. 

•  Adhesion - Excellent adhesion to almost all building materials. 
•  Strength - Bond strength exceeds the tensile strength of conn time to complete the work easily. 
•  Shrinkage - Very low shrinkage as compaired to polymer modified cementitious bonding agents
•  Water resistance - Excellent water resistance and sealing property prevents leakage.
•  Toxicity - Non toxic.
•  Moisture tolerant - It is moisture tolerant hence provides strong bond of new concrete to fresh concrete.
•  Durability - Very high durable bond. 
•  Chemical Resistance - Resistant to chemical attack.crete hence no failure of concrete due to high degree of movements. 

•  Open time - Comfortable open

RSB Infra Solution” are a Wholesaler, Trader , Distributor and Retailer of  Waterproofing Chemical, Waterproofing Compound, etc.ShaliCrete® is a multifunctional acrylic polymer for enhancing properties of concrete, mortar, grout, cement slurry etc. through better bonding, waterproofing and improvement in several other properties. ShaliCrete® is used for permanently bonding plaster to ensure durable finish of exterior walls, bonding new concrete to old concrete, making mortar for repairing and for waterproofing. ShaliCrete® is highly durable in wet condition as well.Easy to use. • Improves bond strength, facilitating tough and hard wearing surface. • Allows trapped vapour to escape thus preventing peeling / blistering. • Reduces cracking through increased mortar flexural strength. • Increases mortar, wears resistance under rubber wheeled traffic. • Increases mortar tensile strength. • Offers greater impact resistance. • Reduces permeability. • Non-flammable and does not give toxic gases when exposed to fire. • Not harmful to the health of the workman.

RSB Infra Solution” are a Wholesaler, Trader , Distributor and Retailer of  Waterproofing Chemical, Waterproofing Compound, etc.Chryso Polyflex EPA is a fast-curing, solvent-free, 2-component epoxy adhesive designed for bonding materials like TPE expansion joint tapes, metal, plywood, and concrete, offering high strength, impermeability, and non-slump, thixotropic properties suitable for vertical and overhead applications. It is ideal for maintenance work in aggressive environments and provides long-term protection against weathering and chemicals, hardening in just a few hours with minimal shrinkage.

• Fast Curing: Hardens in a matter of hours.
• High Strength: Develops high initial and ultimate strengths, exceeding 40 MPa in 24 hours and 65 MPa in 7 days.
• Solvent-Free: Environmentally friendly and safe for use.
• Thixotropic: Non-sagging in vertical and overhead applications.
• Impermeable: Resists liquids and water vapor.
• Non-Shrinkage: Hardens without shrinkage, with a maximum shrinkage of 0.4%.
• Primer-Less: Can be applied without a primer.

RSB Infra Solution” are a Wholesaler, Trader , Distributor and Retailer of  Waterproofing Chemical, Waterproofing Compound, etc.Dr. Fixit Piditop 333 is a cementitious floor harden fresh concrete surface. It is non-metallic aggregates, resistance to abrasion and scratch, increased resistance to oils and grease and Dr. Fixit Piditop 333 is easily use and cost saving.Area of Application Loading & unloading areas, warehouse floors, ramps and trucking lanes, car parks and garage floors. Rate of uses * Theoretical consumption without allowance for loss.  3-5 kg./m² for medium traffic  5-7 kg./m² for heavy traffic Method of Application 1. Concrete Preparation :  After base concrete is placed, level the surface with float. Remove excess bleed water by dragging gunny bag on the surface or rubber hose.  Concrete surface has stiffened to the point of sustaining floating operation, or when foot prints make an impression up to 2-3 mm. depth.

  RSB Infra Solution” are a Wholesaler, Trader , Distributor and Retailer of  Waterproofing Chemical, Waterproofing Compound, etc.five layered system with Atactic Polypropylene (APP) modified non-woven polyester reinforced weighing 140 gm / m2 bituminous membrane (2, 3, 4 & 5 mm) for superior waterproofing. The torch side of the membrane is covered with polyethylene film for protection of the membrane. The polymer modification of bitumen with APP results in an excellent resistance to hot and cold temperatures. SuperThermoLay® is supplied in following variants: • Plain finish with thermo-fusible polyethylene film on both surfaces. • Mineral / natural grey slate finish with thermo-fusible polyethylene film on one surface, and mineral / natural gray slate on the other surface.

RSB Infra Solution” are a Wholesaler, Trader , Distributor and Retailer of  Waterproofing Chemical, Waterproofing Compound, etc. 
Main uses

• To provide excellent acceleration of strength gain at early ages and major increases in strength at all ages by significantly reducing water demand in a concrete mix.
• Particularly suitable for precast concrete and other high early strength requirements.
• To significantly improve the workability of site mixed and precast concrete without increasing water demand.
• To provide improved durability by increasing ultimatestrengths and reducing concrete permeability

Advantages

• Major increases in strength at early ages without increased cement contents are of particular benefit in precast concrete, allowing earlier stripping times.
• Makes possible major reductions in water:cement ratio which allow the production of high strength concrete without excessive cement contents.
• Use in production of flowing concrete permits easier construction with quicker placing and compaction and reduced labour costs without increasing water content.
• Increased workability levels are maintained for longer than with ordinary sulphonatedmelamine admixtures.
• Improved cohesion and particle dispersion minimises segregation and bleeding and improves pumpability.
• Chloride free, safe for use in pre-stressed and reinforced concrete.
• In screed material, the lower water content leads to quicker drying times

RSB Infra Solution” are a Wholesaler, Trader , Distributor and Retailer of  Waterproofing Chemical, Waterproofing Compound, etc. Dr. Fixit Torchshield ranges of polymer - modified bitumen waterproofing membranes are manufactured from rich bitumen & select polymers blended together. It is used for waterproofing of building roofs of all types, basements, foundations & water retaining structures, because it has excellent heat resistance & cold temperature flexibility. The Polymer - modified bitumen is then coated on to a dimensionally stable non-woven polyester carrier to obtain high tensile strength, tear & Puncture resistance.